Flow Control - Actuator

EOM10-12 Series Basic Type Quarter Turn Electric Actuator

EOM series electric actuators produced by FLOWINN can be widely used in water conservancy, electric power, petrochemical, light industry, medicine, municipal and other industries.

The Angle travel electric actuator is mainly used to drive and control the switching degree of ball valves, butterfly valves, plug valves and other similar valves by 90° rotation. The output torque range is 10-20000N.m, which can meet different torque requirements. Physicochemical.

Material of Actuator BodyAluminum Alloy
Control ModeOn-off Type
Torque Range3500-8000N.m
Running Time11-13s
Applicable Voltageone  phase:AC110V / AC220V / AC230V /AC240V   AC/DC 24V
Ambient Temperature -25°C…..70 °C
Anti-vibration LevelJB/T8219
Noise LevelLess than 75 dB within 1m
Ingress ProtectionIP67, Optional: IP68( Maximum 7m; Max: 72 hours)
Connection SizeISO5211
Motor SpecificationsClass F, with thermal protector up to +135°C(+275°F); Optional : Class H
On/off Type SignalInput Signal: AC/DC 24 input control or AC 110/220v input control
Signal Feedback:
1. Close the valve contact
2. Open the valve contact
3. Optional: Closing torque signal contact Local/ remote contacts
4. Integrated fauot contact 4~20 mA to send
Malfunction Feedback: Integrated fault alarm; Motor overheating
Optional: Undercurrent protection contact
Modulating Type SignalInput Signal: 4-20mA; 0-10V: 2-10V
Input iimpedance: 250Ω (4-20mA)
Output signal: 4-20mA; 0-10V: 2-10V
Output impedance: ≤ 750Ω (4-20mA) Repeatability and linearity within ±1% of full valve stroke
Signal Reverse: Support
Loss Signal Mode Setting: Support
Dead Zone: ≤2.5%
Working SystemOn-off Type: S2-15 min, no more than 600 times per hour start Optional:  1200 times per hour
IndicationIndicator of pointer
Other Function1. Phase correction (3-phase power supply only)
2. Torque protection
3. Motor overheat protection
4. Moisture – resistant heaters (anti-moisture device)

Do you need to know more information about this product?