Flow Control - Flanged Offtakes
Home > Flow Control Products > Flanged Offtakes > Ductile Iron Flanged Offtake
Ductile Iron Flanged Offtake (Uniclamp)
316 Stainless Steel Air Series 2 :
Tested in accordance with AS/NZS 4181:2013.
The Derwent Industries Ductile Iron Flanged Offtakes are used for under pressure tapping on pipelines and can be affixed at desired points where tapping is required. The couplings have been designed in conjunction with pipeline tappers for ease of installation. The use of bracing lugs running between the bolt holes, allows the tapper to hold the two halves of the coupling together whilst inserting bolts and tensioning.
Derwent Industries Flanged Offtakes are 100% Australian made.
- Features:
- Material: Ductile Iron Body with 316 SS Bolts
- Coating: Fusion Bonded Epoxy
- Two parts for ease of assembly.
- Bolt Locks/Lugs to support bolts tensioning.
- Bracing Lugs to assist installer in holding halves together whilst bolting up.
- Series 2 please specify Ductile Iron or PVC.
Downloads
Applications:
The Derwent Industries PE Flange Adapters are for use in Potable Water, Waste Water, Fire and Irrigation applications and are suitable for both above and below ground installation.
Installation:
Suitable for above or below ground and shall be in accordance with the relevant regulatory codes and local authority requirements. The system should be pressure tested before backfilling or concealment.
This product complies with the lead-free requirements of NCC Vol 3
| PE Sizes: | DN 125 and DN 180 |
| Series 2 Sizes: | DN 100 (suit OD 122) and DN 150 (suit OD 177) |
| Offtakes: | DN 80, 100 & 150 |
| Certification: | SAI Global |
| PE - Product License No.: | SMK26385 |
| WaterMark License No.: | WMK26385 |
| WSAA No.: | PA1828 |
| S2 - Product License No.: | SMK26386 |
| WaterMark License No.: | WMK26386 |
| WSAA No.: | PA 2025 |
| Codes: | 125 x 80 = 125F080PE 125 x100 = 125F100PE 180 x 80 = 180F080PE 180 x 100 = 180F100PE 180 x 150 = 180F150PE |
| SUITABLE FOR POTABLE (BLUE), RECYCLED (LILAC) WATER AND WASTE WATER | |
| Allowable Operating Pressure: | 1600 kPa, 1.6 Mpa |
| Maximum Test Pressure: | 2400 kPa, 2.4 Mpa |
